Answer
Oct 29, 2025 - 12:00 AM
Yes, your Bose Wave Radio/CD Player (model AWRC1G) does have auxiliary input capabilities, allowing you to connect external audio sources like a turntable.
On the back of the unit, you'll find a pair of RCA AUX IN jacks labeled "L" (left) and "R" (right). These are designed to accept line-level audio signals from devices such as CD players, tape decks, or turntables equipped with built-in preamps.
However, most traditional turntables output a phono-level signal, which is significantly lower than line-level and requires equalization (RIAA) to sound correct. Therefore, to connect a standard turntable to your Bose system, you'll need a phono preamplifier. This device amplifies the phono signal to line level and applies the necessary equalization.
Here's how you can set it up:
-
Connect your turntable to a phono preamp: Use RCA cables to connect the turntable's output to the input of the phono preamp.
-
Connect the preamp to the Bose AUX IN: Use another set of RCA cables to connect the preamp's output to the AUX IN jacks on the back of your Bose Wave Radio/CD Player.
-
Select the AUX input on your Bose system: Use the remote control or the front panel to switch the input source to AUX.
If your turntable has a built-in phono preamp, you can connect it directly to the Bose AUX IN without needing an external preamp. Ensure the turntable's preamp is activated, often via a switch labeled "Phono/Line" or similar.
Remember to match the red and white RCA plugs to the corresponding jacks to maintain proper stereo sound.
By following these steps, you should be able to enjoy your vinyl records through your Bose Wave Radio/CD Player.
